Teradek User Guide

Audio/Video

Updated

The Video and Audio menus contain input source information and audio source configuration options. Tap the Shortcut tab and select Event Configuration then tap Video Settings or Audio Settings to configure either settings. From the web UI, click on the Audio/Video tab. 

VIDEO SETTINGS

Resolution - Maintain the input’s native resolution (Auto), or select from a list of resolutions.

Bitrate Selection - Select from a list of bitrate figures, or manually enter a custom bitrate.

Bitrate (kbps) - Select your stream’s target bitrate. Lower bitrates require less bandwidth and may allow for a more stable stream while higher bitrates offer better video quality, but require more network bandwidth.

Framerate Selection - Select Auto to maintain the input frame rate, or select Custom to choose a frame rate that matches the exact figure or a fraction of the input frame rate.

Key Frame Interval - Adjust the amount of time between full picture refreshes.

AUDIO SETTINGS

Audio Input - Choose the source used for the audio stream. Select HDMI (Embedded, or Analog audio.

Mute - Turn off Audio.

Bitrate Selection - Select from a list of bitrate figures, or manually enter a custom bitrate.

Bitrate (kbps) - Select your stream’s target bitrate. Lower bitrates require less bandwidth and may allow for a more stable stream while higher bitrates offer better video quality, but require more network bandwidth.

Previous Articles Network
Next Articles System