Teradek User Guide

Debonding License

Updated on

What Does It Do?

The Debonding license comes in two types

License 1 -  Allows users to receive a stream via Teradek Bonding Protocol (and in the Future TRT)  and decode that stream to SDI/HDMI

License 2 - Everything in License 1 but allows up to 5 outputs

What Is It Used For?

The license is primarily used when a cloud connection is unavailable or not desired.
For example, bonding across multiple connections from a roaming camera with a Prism Mobile back to a decoder in a small market TV station.

Supported Input Protocols

The Debonding license supports the following ingest types which will be passed onto the decoder

  • Teradek Bonding Protocol
  • TRT (Future)

Supported Output Protocols

The Decoder supports the following outbound types

  • Teradek Bonding Protocol
  • RTSP
  • MPEG TS
  • SRT
  • RTMP
  • HLS
  • Airmix (TDS)

REQUIREMENTS

  • Prism Flex Decoder or Prism RU Decoder
  • Debonding License
  • A navigable public IP or a firewall that supports port forwarding when used with the public internet.
  • Teradek Bonding Protocol - port 5111 TCP/UDP. All others are declared in the configuration UI.

Contact your IT department for assistance with firewall configuration.

Setup the Debonding License

This is the standard setup process for the Teradek Bonding Protocol over the public internet, assuming that your network requirements are in sync.

1. Navigate to the IP address of the Prism Flex or Prism RU decoder to open the decoder web UI.
2. From the decoder’s web UI, open Licenses and click the Enter License Key tab to enter the Decoder license key. If you don't have a license, please contact [email protected].

3. Open the Ingest tab above and set the Ingest Mode to Hyperion.

4. Scroll down and click + Add Ingest, then choose Teradek Bonding from the Stream Ingest options. Next, configure the Prism Encoder to transmit to the Decoder (see below). Once the video signal is live, choose the encoder via its serial number from the Device List to set up the Device ID. If you have set a password on the encoder, enter it in the Password field. When done, click Save to complete the process.

5. To output the stream to a specific destination, click + Add Stream under the Hyperion Output section.

6. Click the Scroll-down icon and select a Stream Mode. Click Save when done.

STREAM OUTPUT MODES

  • Teradek Bonding - Select this mode to stream to Core or another Hyperion Server (uncommon)
  • MPEG Transport Stream - Prism sends video via a TCP or UDP protocol to a specified unicast or multicast address.
  • SRT - Transmit high-quality, low-latency video over unreliable networks to a single destination IP address on a specific port. A port number and a passphrase (if encryption is enabled) are needed.
  • RTSP - Prism sends video via a TCP or UDP protocol to a specified IP address. Ensure you have the correct port and stream name (stream1 is the default).
  • HLS - Creates an HLS pull server that can be viewed in a web browser.
  • Airmix - Stream to device using the Airmix app (port default is 2020). NOTE: The Decoder and the device running Airmix must be on the same WiFi network.
  • Preset - Select a preconfigured Channel Preset from the Preset list below. NOTE: You must first configure a preset and/or account (if outputting to a streaming platform) before selecting this option.
    • Preset Streaming Options:
      • MPEG Transport Stream
      • SRT
      • RTSP
      • RTMP
      • Streaming Platforms - Facebook, Youtube, Vimeo, etc (you must first configure an account in the Accounts window below Channel Presets)

For information on different stream modes, click here

7. Click Save when done.

Setup the Encoder to Stream to the Decoder

1. From the encoder’s web UI, open the Input/Encoding tab and set the Stream Mode to Teradek Cloud.

2. Enter the details

  • Host: Public IP (whether port forwarded or not)
  • Port: (Default 5111) or if your public port forwarded port
  • Session Password (Optional):  Must match on the Decoder, if used
  • Buffer length:  the amount of delay in the Decoder to allow multiple connections to arrive.
  • Adaptive Bitrate: allows Teradek Bonding Protocol to adapt the bitrate of the stream to the entire network bond.
  • Encryption (Optional):  Encrypts Teradek Bonding Protocol with AES-128

3. Click Save and the encoder will start to stream video.

Previous Articles Prism Mobile
Next Articles Decode License