DUAL ETHERNET PORTS
Prism chassis features two independent Ethernet ports (Wired 1, Wired 2). These two Ethernet ports connect to an internal switch inside the chassis (one per Ethernet port), allowing an encoder/decoder card to have two addressable ports as well as two different networks. For example, one port can connect to an internal network for configuration while the other port can connect to a separate network for streaming.
Internet routing is configured automatically, so either port can be used to stream out over a WAN. If both connections have Internet access, the Wired 2 interface takes priority over Wired 1. Both interfaces can be configured for DHCP or static addresses independently of one another.
NOTE: Only use one Ethernet port at a time.