The Video/Audio Settings section lets you configure Bolt 7s video input and output to match your camera and monitor. Select the transmitters video input, apply 1D or 3D LUTs, adjust input and output ranges, and choose what the receiver displays when it receives no video. You can also reduce artifacts with Static Video Optimization, mute audio, and enable tones to indicate when the camera starts or stops recording.
Receiver Video Settings
1D/3D LUT Settings
The 1D and 3D LUT settings menu contains specific looks that can be applied to your video output that either match or simulate how the video will appear after editing, along with options for how they are overlaid on your video output (Full or Split-screen). Additional color preset files can be added and saved from your computer using BOLT MANAGER.
- 1D/3D LUT Presets - Select a specific look from the list of 3D LUT presets.
- 1D/3D LUT Mode - Select whether the look is applied to the entire video output (Full Screen) or
- half (Split Screen).
Output Format (Coming Soon)
You can choose to match the video source’s resolution (Same As Input) or choose from the resolutions list. If using the receiver with a recorder or monitor that is sensitive to video signal changes, select Continuous Output to ensure the signal stays constant even if the link is interrupted. Keep in mind that selecting Continuous Output adds a small delay to the video output. Selecting SD, HD, or 6G-UHD matches the video source's frame rate while adjusting the resolution. This is useful for when you need to down-convert a 4K video to display on an HD monitor.
- Continuous Output - Video signal output stays constant when using a monitor or recorder that is sensitive to video signal changes.
- Same as Input - Matches the transmitter's video source resolution.
- SD - Matches the TX frame rate and outputs SD resolution.
- HD - Matches the TX frame rate and outputs1920x1080p.
- 6K-UHD - Matches the TX frame rate and outputs 3840x2160.
- Resolutions List- Select a specific output resolution:
- 4K (DCI) - 23.98/24/25/29.97/30/50/59.94/60
- 4K (UHD) - 23.98/24/25/29.97/30/50/59.94/60
- 1080p - 23.98/24/25/29.97/30/50/59.94/60
- 1080psf - 23.98/24/25/29.97/30
- 1080i - 50/59.94/60
- 720p - 50/59.94/60
- 480p - 50/59.94 (via HDMI ports only)
HDMI
Bolt 7 supports all HDMI output modes. You can select from one of the following options:
- Auto
- RGB 8bit
- RGB 10bit
- YCbCr 4:4:4 8bit
- YCbCr 4:4:4 10bit
- YCbCr 4:2:2 10bit
- YCbCr 4:2:0 8bit
- YCbCr 4:2:0 10bit
Background
Select a background color to display on the monitor when the receiver receives no video from the transmitter. The background alerts the crew to a video interruption so they can check the connection between the transmitter and receiver.
- Black — Display a neutral black screen to minimize distractions.
- Blue or Yellow — Display a color screen to distinguish missing video from a black camera image.
- No Video — Disable the output signal
Input/Output Range
Adjust the video signal range to maintain correct black and white levels. Select Full or Legal for Input Range to match your video source, and for Output Range to match your connected monitor. Incorrect settings can cause washed-out blacks, clipped shadows and highlights, or cause 1D and 3D LUTs to be applied incorrectly.
Transmitter Video Settings
Static Video Optimization
Static Video Optimization helps to reduce the appearance of artifacts around fixed, high contrast parts of the video image. Frame lines, clip names, and other on screen text from some cameras is where these are most visible.
Options:
- Enable Optimization (default)
- Disable - Improves details in gradients, particularly for LOG video signals
Receiver Audio Settings
Use the Audio Settings menu to mute audio or enable a short tone when the camera starts or stops recording.
Audio Mute Choose when to mute audio:
- Off Keep audio enabled, including while recording.
- Mute while recording Mute audio while the camera records.
- On Mute audio at all times.
Audio Beep Enable a short tone to indicate when the camera starts or stops recording.





