Bolt 7 transmitters and receivers purchased as a set come paired and ready to use. Pair separately purchased units using the new Wired pairing feature, the front-panel menu, Bolt Manager, or the Bolt App. Wired pairing lets you pair a transmitter and receiver by connecting them with the included 5-pin to USB-C cable. Use Bolt Manager or the Bolt App to pair multiple receivers with one transmitter. Note: Before pairing, confirm that both units run the same firmware version and have Bluetooth enabled.
Pairing
Wired Pairing
To Pair:
- Power on the Bolt 7 transmitter and receiver.
- Connect the transmitter and receiver using the included 5-pin to USB-C cable.
- Wait five seconds for the devices to pair automatically.
- Open the Paired Devices menu to confirm that pairing is complete.
To Pair:
- Using the Menu Joystick, navigate to the Pairing menu on the receiver and transmitter.
- Select the type of device you will be pairing with: Bolt 7, Bolt 4K, or Bolt 6.
Bolt 7: The receiver will search for nearby discoverable Bolt 7 transmitters. Make sure your Bolt 7 transmitter is in Discoverable mode.
Bolt 4K/6: The transmitter will scan for a receiver within range and automatically pair with it. - Once paired, the front panel will indicate whether or not Pairing is successful.
Pairing Tips
If you’re having trouble getting units to pair, we recommend keeping the transmitter and receiver six feet apart when pairing (if antennas are connected). Without antennas, they can be closer. Keep all other RF devices nearby turned off or out of range to ensure the transmitter and receiver are only detecting each other. To eliminate any chance of interference, perform the Wired Pairing process via Bolt Manager.
Via the Bolt App
To Pair:
- Open the Bolt App from your iOS or Android device, then tap the Pairing button.
- Select the transmitter you wish to pair, then tap the Next button.
- Select the receiver(s) you wish to pair with the transmitter, then tap the Pair! button. The Bolt App will indicate when the pairing process is complete.
Via Bolt Manager
To Pair:
- Connect both the transmitter and receiver(s) to your computer (Windows/Mac) via USB.
- Open Bolt Manager, select the Pairing tab, then tap the Wired Pairing button.
- Select the devices you want to pair, then click the Pair Devices button. Bolt Manager will indicate whether or not Pairing is successful.
Unpairing
Via the Front Panel:
- Navigate to the Paired Devices menu (Unpair on Bolt 6/4K) on either the transmitter or the receiver.
- Select the transmitter/receiver you want to unpair. If you have multiple devices paired, you can select Unpair All.
Via Bolt App:
- Open the Bolt App from your iOS or Android device, then tap the settings button (3 dots) on the top right corner of the screen.
- Enter the Pairing menu, select the receiver(s) you wish to unpair, then tap the Unpair button.
Via Bolt Manager:
- Connect both the transmitter and receiver(s) to your computer (Windows/Mac) via USB.
- Open Bolt Manager, select the Pairing tab, then tap the Unpair All button.


