Teradek User Guide

Wireless Configuration Recommendations

Updated on

Bolt 7 can be used in many different situations that require you to configure the wireless settings to provide the optimal video transmission quality possible. The following table (TX Video Quality Descriptions) describes the Video Quality modes available on the TX. The table below (Recommended Wireless Configurations) illustrates some of the most common scenarios encountered while using the Bolt 7, along with recommended wireless settings that will provide you with the best video quality in those situations.

 

TX Video Quality Descriptions

Video Quality ModesDescription
Auto Mode (Default)In Auto Mode, the system will jump between the configurations listed below based on the range and signal quality - if you know your conditions won't change, you can set them manually.
Long Range ModeLong Range Mode is best for outside use, but will slightly reduce your video signal’s maximum quality.
Medium Quality ModeThis mode is best for indoor use. Medium Quality Mode maintains higher signal quality but reduces the maximum range.
High Quality ModeHigh Quality Mode is ideal for complex, high-contrast scenes that require the highest possible quality.
Low Power ModeLow Power Mode provides the best connection possible at extremely short distances by reducing the transmitter's total power consumption and any unwanted interference in multi-system environments.

Wireless Settings
User Scenarios
BandBroadcast ModeFixed FrequencyBandwidthVideo Quality (TX)
Auto (Default)5GHzDisabledDisabled40MHzAuto Mode
Longer Range
(No interference)

5GHzEnabled w/Panel AntennaOptional40MHzLonger Distance Mode
Long Range
(Busy RF)
6GHzEnabledOptional40MHzLonger Distance Mode
Short Range6GHzOptionalEnabled40MHzAuto or
Best Quality Mode
Best Video Quality (4K)6GHzDisabledOptional40MHzAuto or
Best Quality Mode
Best Video Quality (HD)6GHzDisabledOptional40MHzAuto or Best/Better Quality Mode
Multi-System*
(Close Range)
6GHzDisabledEnabled20MHzBetter Quality Mode
Multi-System*
(Mid Range)
6GHzDisabledEnabled20MHzLonger Distance Mode
Multi-System*
(Short Range)
6GHzOptionalOptional40MHzLow Power Mode

* Multi-System scenarios refer to situations where multiple TX and RX paired systems are in use in the same vicinity as the system you are trying to configure.

Previous Articles Wireless Configuration
Next Articles Data Settings
Still Need Help? Contact Us