The Tools menu provides options for checking wireless reception, identifying congested frequencies, and testing video signals and SDI cables. You can also adjust the On-Screen Display (OSD) to control when and how status information appears on your monitor.
Signal Quality Graph (RX)
The Signal Quality Graph indicates the quality and reliability of the signal being received according to the amount of interference that is present between the RX and TX. When enabled, the graph will be displayed on the right lower corner of your monitor.
Use the Signal Quality Graph to monitor changes in the receiver's signal quality as you adjust the antennas or move the receiver. The graph responds quickly to these changes, even when you cannot see a difference in the received video.
Signal Quality is represented in percentages:
- Figures below 30% indicate poor signal quality
- Figures between 30% and 45% indicate fair signal quality
- Figures above 45% indicate good signal quality
Spectrum Analyzer (RX)
The built-in Spectrum Analyzer visually indicates channel noise and saturation across the entire available frequency range. Move the Menu joystick left and right to select a frequency.
Frequencies are represented by colored bars. Green bars indicate the frequency is less congested and can be used. Yellow and Orange bars indicate that there are other signals detected on those frequencies. Red bars indicate the specific frequency is too saturated to to connect to.
TPG (Test Pattern Generator) Mode
Use the TPG Mode menu to select a test pattern for checking the video signal and display.
Select one of the following test patterns:
- Color Bars
- Ramp
- Grey
- Focus
Test Pattern (TX)
The Test Pattern menu allows you to select a video resolution format to output a test pattern over HDMI or SDI.
- Resolutions List- Select a specific output resolution:
- 4K - 23.98/24/25/29.97/30/50/59.94/60
- 1080p - 23.98/24/25/29.97/30/50/59.94/60
- 1080psf - 23.98/24/25/29.97/30
- 1080i - 50/59.94/60
- 720p - 50/59.94/60
- 480p - 59.94/576p - 50 (via HDMI ports only)
- 480i (NTSC)
- 576i(PAL)
SDI Cable Test (TX)
The SDI Cable Test provides a graphical display of the SDI signal coming from the camera to the transmitter, and is useful in determining the amount of interference present, or if the SDI cable is damaged. The size of the pattern displayed on the front panel indicates the quality of the SDI signal. The bigger the size of the pattern is, the better the SDI signal.
OSD (RX)
Choose when and how the On-Screen Display appears on your monitor. Adjust its appearance and position to keep on-screen information visible while minimizing interference with the video image.
OSD
- Disabled - Disable OSD.
- Show when no video- Display OSD when there is no video feed; hide OSD when video appears (default).
- Enabled - Always display OSD unless temporarily deactivated by the joystick.
Position
Select where on your monitor the OSD will be displayed.
Look
Choose how the OSD text, icons, and background appear over your video:
- Normal — Display opaque text and icons with a semi-transparent background.
- Translucent — Display semi-transparent text and icons with a lighter background.






