| Bolt 7 Transmitter | Bolt 7 Receiver | |
| VIDEO | ||
| Video Inputs | 1x 12G-SDI SMPTE 2082-1 standard/75 Ω (BNC x 1) 1x HDMI 2.0 Type-A receptacle 1x USB-C DisplayPort Alt Mode video input | N/A |
| Video Outputs | 1x Loopout 12G-SDI SMPTE 2082-1 standard/75 Ω (BNC x 1) | 1x 12G-SDI SMPTE 2082-1 standard/75 Ω (BNC x 1) 1x HDMI 2.0 Type-A receptacle 1x USB-C DisplayPort Alt Mode video output |
| SDI Ancillary Data Support | Supports transmitting timecode and start/stop flags from most camera manufacturers. More metadata for Arri and Sony cameras. | |
| Color Sampling | SDI: YCbCr 4:2:2, 10-bit HDMI: RGB/YCbCr; 4:4:4/4:2:2/4:2:0; 8/10-bit | SDI: YCbCr 4:2:2, 10-bit HDMI: RGB/YCbCr; 4:4:4/4:2:2/4:2:0; 8/10-bit |
| Delay (TX to RX) | < 0.001 sec (without format conversions) | |
| Supported Resolutions | 4Kp23.98/24/25/29.97/30/50/59.94/60 1080p23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60 | 4Kp23.98/24/25/29.97/30/50/59.94/60 1080p23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60 |
| Input Cross Conversion | Yes (HDMI input to SDI loopout) | N/A |
| Output Video Processing | N/A | Yes (deinterlacer, frame rate converter, scaler, 3D LUTs) |
| Other Tools | SDI Eye Pattern Display | Spectrum Analyzer, Test Pattern Generator |
| VIDEO PROCESSING | ||
| Video Compression | Visually lossless | Visually lossless |
| Test Pattern Generator | N/A | Yes |
| Video Format Conversion Support | Yes | Yes |
| Spectrum Analyzer | N/A | Yes |
| Color Correction | N/A | 17x17x17 3D LUT (Supports 10-bit color), 1D LUTs |
| AUDIO | ||
| Audio Format | 48kHz 24-bit PCM | 48kHz 24-bit PCM |
| Audio Input | Embedded SDI/HDMI Audio Input (2 Channel) | N/A |
| Audio Output | N/A | Embedded SDI/HDMI Audio Output (2 Channel) |
| PHYSICAL ATTRIBUTES | ||
| Dimensions | 4.4” x 2.6” x 1.3” (112 x 66 x 32 mm) | 4.4” x 3.4” x 1.3” (112 x 88 x 32 mm) |
| Weight | 14.1oz (400g) | 16.3oz (463g) |
| Construction | Milled aluminum (chassis), regulation-compliant PCB | Milled aluminum (chassis), regulation-compliant PCB |
| INTERFACES | ||
| Configuration Interface | Color OLED with Menu, Joystick Navigation | Color OLED with Menu, Joystick Navigation |
| Switches | N/A | N/A |
| USB-C port | Firmware upgrade DisplayPort Alt Mode video input Device setup via Bolt Manager desktop app | Firmware upgrade DisplayPort Alt Mode video input Device setup via Bolt Manager desktop app |
| Locking 5-pin USB port | USB host port for camera control via smart cables (optional) | USB host port for camera control via smart cables (optional) |
| Ethernet | Via smart cable connected to locking 5-pin USB port | Via smart cable connected to locking 5-pin USB port |
| Bluetooth Compatibility | BLE for device setup and monitoring via smartphone app | BLE for device setup and monitoring via smartphone app |
| NETWORK | ||
| Wireless | DFS Frequencies: Non-DFS Frequencies: | DFS Frequencies: Non-DFS Frequencies: |
| Bluetooth | 2.4GHz | 2.4GHz |
| RF Channel Selection | Auto, Manual | Auto, Manual |
| Encryption | AES-256, RSA-1024 key exchange | AES-256, RSA-1024 key exchange |
| RF Power | 23 dBm EIRP (max power) | 21 dBm EIRP (max power) |
| Antennas | 3x external, 2x internal | 750/1500: 4x external, 2x internal (not compatible w/panel antenna) MAX: 6x external (compatible w/ panel antenna) |
| Range | 750: Up to 750ft (229m) line of sight 1500: Up to 1500ft (457m) line of sight MAX: Up to 5000 ft, line of sight | |
| Multicast | Can connect one transmitter to up to 6 receivers | |
| Noise Rejection | Can coexist with Wi-Fi and 5GHz cordless phones Can operate up to 6 sets in the same location | Can coexist with Wi-Fi and 5GHz cordless phones, and operate up to 6 sets in the same location |
| Broadcast Mode | 750/1500: No MAX: Yes, transmitter can transmit to 250 receivers | 750/1500: No MAX: Yes, transmitter can transmit to 250 receivers |
| Camera Control Radio | 860-920 MHz | 860-920 MHz |
| POWER | ||
| Power Input | 2-pin locking connector 6-28 VDC | 2-pin locking connector 6-28 VDC |
| Battery | None, optional field-installable Gold- or V-Mount dual battery plate | None, optional field-installable Gold- or V-Mount dual battery plate |
| Nominal Power Consumption | 15 Watts | 18 Watts |
| Operating Temperature | 0~40 deg-C | 0~40 deg-C |
| GENERAL | ||
| Mounting | Multiple mounting options with M3 and 1/4-20” holes | Multiple mounting options with M3, 3/8” and 1/4-20” holes |
| Compatibility | Compatible with all Bolt 4K, Bolt 6 and Bolt 7 products | Compatible with all Bolt 4K, Bolt 6 and Bolt 7 products |
Bolt 7 Technical Specifications
Updated on