Teradek RT products support record triggers for a number of different camera systems and remote control protocols. Follow the instructions below to enable run/stop with your camera.
- Connect a camera cable from the CAM port on the receiver to the camera. Teradek sells a variety of cables to work with different camera types. Click here to view the available cables.
- Navigate to MENU>CAMERA on the MDR.S or MDR.X receiver and select which camera you have connected. Options include the following:
- RED RCP - Compatible with DSMC2 cameras that support RCP2, note that some cameras have RCP disabled by default. Refer to your camera's user guide for instructions on how to enable RCP. Set your CAMERA setting to ARRI when using with newer cameras with a 3-pin R/S port
- ARRI
- SONY - Compatible with Sony professional cameras with 8 pin REMOTE port
- PH FLEX (Phantom Flex)
- LANC - LANC protocol is supported by a number of different cameras, including Sony, Canon, and more
- Press the REC/PWR button on the controller to start/stop recording on the camera.
NOTE: When using ARRI, SONY, or Phantom FLEX cameras with 24v power, your MDR must be powered using the same voltage for the run/stop signaling to work properly.