Bolt 4K devices purchased as a set (TX and RX) are paired by default, requiring no additional configuration. Bolt 4K devices purchased separately need to be paired using the device's front panel (OLED) menu, Bolt Manager, or the Bolt App. You will need to use either Bolt Manager or the Bolt App to pair your transmitter with multiple receivers. NOTE: Before starting either pairing process, ensure that both the transmitter and receiver have the same firmware version and have Bluetooth enabled.
Pairing/Unpairing via the Front Panel
TO PAIR:
- Using the Menu Joystick, navigate to the Pair menu on both the transmitter and the receiver.
- Select Pair to begin the pairing process. The transmitter will begin scanning for a receiver within range and automatically pair to the receiver.
- Once paired, the front panel will indicate whether or not Pairing is successful.
TO UNPAIR:
- Navigate to the Unpair menu on either the transmitter and the receiver.
- Select the transmitter/receiver you want to unpair. If you have multiple devices paired, you can select Unpair All.
PAIRING TIPS
If you’re having trouble getting units to pair, we recommend keeping the transmitter and receiver six feet apart when pairing (if antennas are connected). Without antennas, they can be closer. Keep all other RF devices nearby turned off or out of range to ensure the transmitter and receiver are only detecting each other. To eliminate any chance of interference, perform the Wired Pairing process via Bolt Manager.
Pairing via Smart 7 Monitor (TX Module)
TO PAIR:
- Swipe right on the monitor’s touchscreen, then tap on the Settings option once it appears.
- Scroll back up and tap to select the TERADEK BOLT 4K option, then tap Pair new receiver.
- Enable Pairing on the Bolt 4K receiver(s)or by selecting Pair on the front panel menu. The Monitor Module will begin scanning for receivers to automatically pair with. Note: You can pair the transmitter with up to six receivers at one time.
- Once the devices are paired successfully, tap Accept to dismiss the menu. If pairing fails, try again.
TO UNPAIR:
- Swipe right on the monitor’s touchscreen, then tap on the Settings option once it appears.
- Scroll down the left column and select the TERADEK BOLT 4K option, then tap Unpair ALL receivers.
Pairing via Smart 7 Monitor (RX Module)
TO PAIR:
- Swipe right on the monitor’s touchscreen, then tap on the Settings option once it appears.
- Tap to select the TERADEK BOLT 4K option, then tap Pair new transmitter (TX).
- Enable Pairing on the Bolt 4K transmitter(s) by selecting Pair on the transmitter's front panel menu. The RX module will begin scanning for transmitters to automatically pair with. Note: You can pair the receiver with up to six transmitters at one time.
- Once the devices are paired successfully, tap Accept to dismiss the menu. If pairing fails, try again.
TO UNPAIR:
- Swipe right on the monitor’s touchscreen, then tap on the Monitor Settings option once it appears.
- Tap to select the TERADEK BOLT 4K option, then tap Unpair transmitter(s).
Pairing/Unpairing via the Bolt App
TO PAIR:
- Open the Bolt App from your iOS or Android device, then tap the Pairing button.
- Select the transmitter you wish to pair, then tap the Next button.
- Select the receiver(s) you wish to pair with the transmitter, then tap the Pair! button. The Bolt App will indicate when the pairing process is complete.
TO UNPAIR:
- Open the Bolt App from your iOS or Android device, then tap the settings button (3 dots) on the top right corner of the screen.
- Enter the Pairing menu, select the receiver(s) you wish to unpair, then tap the Unpair button.
Wired Pairing via Bolt Manager
TO PAIR:
- Connect both the transmitter and receiver(s) to your computer (Windows/Mac) via USB.
- Open Bolt Manager, select the Pairing tab, then tap the Wired Pairing button.
- Select the devices you want to pair, then click the Pair Devices button. Bolt Manager will indicate whether or not Pairing is successful.
TO UNPAIR:
- Connect both the transmitter and receiver(s) to your computer (Windows/Mac) via USB.
- Open Bolt Manager, select the Pairing tab, then tap the Unpair All button.
Switch TX (RX only)
Bolt 4K receivers can pair up to four transmitters simultaneously. Switch TX allows you to quickly switch from one paired transmitter's camera feed to another paired transmitter. This feature is especially useful in multi-camera situations when you need to switch to a different camera's view mid-shoot, without having to perform the pairing process every time. The Switch TX feature can be found in the main menu. NOTE: The transmitter(s) need to first be paired with the receiver.