Recent updates
-
Prism HD+ 1RU/2RU
Updated onArticlesEncoders - Cube, Prism and Vidiu Products Prism Technical Specifications
-
Prism 4K 1RU/2RU
Updated onArticlesEncoders - Cube, Prism and Vidiu Products Prism Technical Specifications
-
Connect to a Network
Updated onArticlesPrism 1RU/2RU allows you to connect to a network using an Ethernet connection, while Prism Flex can connect to a network using Wi-Fi, Ethernet, or a USB modem. Use the front panel interface or the web user interface (web UI) to connect Prism to a network.
Encoders - Cube, Prism and Vidiu Products Prism Basic Configuration
-
Power and Connect
Updated onArticles- Connect 100-240v A/C power to the power input on Prism via the enclosed IEC cable. Connect a second cable if your device includes a supplemental power supply.
- Connect one or both of Prism’s 10/100/1000 Ethernet ports to a network switch or router using an Ethernet cable.
- Connect SDI video sources to any input BNCs corresponding to installed encoder cards.
- Connect SDI outputs via BNC cable to your monitor/switcher/router.
- Using the menu joystick, navigate to the Network Settings menu on the front panel. Select a Wired interface, then verify that the IP Mode is set to DHCP.
- Once Prism is connected to a network, the front panel will display the current assigned or configured IP address for both Ethernet ports.
Encoders - Cube, Prism and Vidiu Products Prism Basic Configuration
-
Encoder/Decoder Configuration
Updated onArticlesConfigure your decoder to receive streams from an encoder.
Encoders - Cube, Prism and Vidiu Products Prism Basic Configuration
-
System Configuration
Updated onArticlesEssential system functions, including factory reset, firmware upgrade, and diagnostics reports can be performed from the System menu in the web UI.
Encoders - Cube, Prism and Vidiu Products Prism Network/System Configuration
-
Prism Flex
Updated onArticlesEncoders - Cube, Prism and Vidiu Products Prism Physical Properties
-
Prism 2RU Chassis
Updated onArticlesDUAL ETHERNET PORTS
Prism chassis features two independent Ethernet ports (Wired 1, Wired 2). These two Ethernet ports connect to an internal switch inside the chassis (one per Ethernet port), allowing an encoder/decoder card to have two addressable ports as well as two different networks. For example, one port can connect to an internal network for configuration while the other port can connect to a separate network for streaming.
Internet routing is configured automatically, so either port can be used to stream out over a WAN. If both connections have Internet access, the Wired 2 interface takes priority over Wired 1. Both interfaces can be configured for DHCP or static addresses independently of one another.NOTE: Only use one Ethernet port at a time.
Encoders - Cube, Prism and Vidiu Products Prism Physical Properties
-
Prism 1RU Chassis
Updated onArticlesDUAL ETHERNET PORTS
Prism chassis features two independent Ethernet ports (Wired 1, Wired 2). These two Ethernet ports connect to an internal switch inside the chassis (one per Ethernet port), allowing an encoder/decoder card to have two addressable ports as well as two different networks. For example, one port can connect to an internal network for configuration while the other port can connect to a separate network for streaming.
Internet routing is configured automatically, so either port can be used to stream out over a WAN. If both connections have Internet access, the Wired 2 interface takes priority over Wired 1. Both interfaces can be configured for DHCP or static addresses independently of one another.NOTE: Only use one Ethernet port at a time.
Encoders - Cube, Prism and Vidiu Products Prism Physical Properties
-
End-of-Life Notification for Cube 6xx / Cube 7xx / Serv Pro
Updated onArticlesDear Valued Customer,
As one legacy ends, a new one begins. From high-profile movies and breaking news to rocket launches and rally racing, the Cube, and its sister product Serv Pro, has had a storied history.
For over 10 years, several generations of Cube and the products that spun off of it powered some of the most important live events around the world. But the time has come to start a new chapter in Teradek’s history inspired by the incredible legacy Cube is leaving behind.
In order to meet the most common requests from our customers and maximize our resources, we have decided to begin the End-of-Life (EOL) process for Cube 6xx, Cube 7xx, and Serv Pro product lines detailed below.
Affected Products
Notices Notices Discontinued Products