Recent updates
-
Supported Cameras for Teradek C2C Encoders
Updated onArticlesTeradek is the on-ramp to the cloud. Our encoders push live streams and instant recordings to a variety of cloud platforms for viewing and playback. Recordings can also be used for editorial, either as the hero negative or as a proxy. If used as a proxy, it is important for recordings to match the camera’s original timecode and filename, so they can later be relinked to the Original Camera Footage (OCF). To do this, our encoders:
- Read the metadata coming from the camera’s SDI or HDMI feed
- Generate instant encodings
- Check match accuracy
- Upload to the cloud
Each camera manufacturer and each individual camera define their metadata differently. Teradek encoders must therefore parce the information coming out of the SDI feed and determine how to best pull the necessary information.
We have tested the following camera for their known accuracy. It is possible that other cameras will also work.
Tip: If using a camera not on this list, set your Teradek encoder’s “Camera Record Trigger” to “Sony” in the encoder’s Web UI.
Teradek SDI Encoders for Supported Cameras
- Teradek Cube 655
- Teradek Serv 4K
- Teradek Prism Flex
Encoders - Cube, Prism and Vidiu Products Serv Basic Configuration
-
Recording
Updated onArticlesBoth Serv 4K and Serv Micro support recording. Your Serv unit allows you to record your broadcasts directly to an SD Card, configure a network file system (NFS) to store your recorded footage on, or sync your recordings with Core. Each recording is saved with the same resolution and bitrate set on the device.
Encoders - Cube, Prism and Vidiu Products Serv Basic Configuration
-
Power and Connect
Updated onArticles1. Serv 4K: Connect power to Serv 4K using the included A/C adapter or D-Tap cable to a battery.
Serv Micro: Attach an LP-E6 battery or use the included A/C adapter to connect power to Serv Micro.2. Attach the two Wi-Fi antennas to the RP-SMA connectors (D).
3. Connect the HDMI or SDI output from your video source to the unit's input connector (H or L).
4. Turn the Power switch on the back (M) to the ON position.
Encoders - Cube, Prism and Vidiu Products Serv Basic Configuration
-
Prism Mobile Quick Start Guide
Updated onArticlesPrism Mobile is the lightest LTE-enabled camera-back video encoder on the market. With a flexible I/O and a compact, low-SWaP design, Prism Mobile easily fits into any workflow. Prism Mobile gives you 4K 10-bit HDR video transmission with integrated LTE network bonding for live coverage from any location. Prism Mobile is designed to seamlessly fit onto the back of your ENG or professional camera or placed directly on a table top. Prism Mobile can encode up to 4Kp60 video with stunning 10-bit 4:2:2 image fidelity paired with Stereo or 5.1 surround sound. The Prism platform supports many common streaming protocols such as MPEG-TS, RTSP/RTP, RTMPS, and SRT, and can be connected to Teradek’s Core Cloud Platform for even more flexibility.
Encoders - Cube, Prism and Vidiu Products Prism Quick Start Guides
-
Prism Quick Start Guide
Updated onArticlesPrism 4K and Prism HD + are Teradek’s premium encoder and decoder systems for broadcast, live production, and Pro AV applications. With room for up to nine codec cards in a 2U chassis (up to three codec cards in 1U chassis), Prism can encode or decode up to 4Kp60 video (1080p60 video for Prism HD+) with stunning 10-bit 4:2:2 image fidelity. Prism supports many common streaming protocols such as MPEG-TS, RTP, RTMPS, and SRT.
Encoders - Cube, Prism and Vidiu Products Prism Quick Start Guides
-
Prism Flex Quick Start Guide
Updated onArticlesWith flexible I/O and a compact, low-power design, Prism Flex easily fits into any workflow. Prism Flex is perfect for placement on a table top, camera-top, or wedged between your video switcher and audio mixer. Prism Flex can encode or decode up to 4Kp60 video with stunning 10-bit 4:2:2 image fidelity. The Prism platform supports many common streaming protocols such as MPEG-TS, RTSP/RTP, RTMPS, and SRT, and can be connected to Teradek’s Core Cloud Platform for even more flexibility.
Encoders - Cube, Prism and Vidiu Products Prism Quick Start Guides
-
Support Resources
Updated onArticlesIn addition to this Reference Guide, you can find more information on Prism's features and operation by visiting www.teradek.com. If you are unable to find what you need online, please contact Teradek’s support staff.
E-mail: [email protected] | Phone: (888) 941-2111 ext. 2 (available M-F 7am-6pm PST)Encoders - Cube, Prism and Vidiu Products Prism Regulatory Information
-
Warning
Updated onArticlesPrism devices contain sensitive electronic components that can be damaged by electrostatic discharge (ESD). When handling, care must be taken so that the device is not damaged. Damage due to inappropriate handling is not covered by the warranty. For complete warranty information, please see the warranty card that arrived with the device, or visit www.teradek.com/pages/warranty-information.
Encoders - Cube, Prism and Vidiu Products Prism Regulatory Information
-
Encoder Configuration
Updated onArticlesPrism encoders are capable of encoding and streaming video using a number of different protocols. Choose the Stream Mode best suited for your application. To view or modify the current streaming mode, select the encoder you want to configure, click the Streaming tab on the right side of the preview window, then select a streaming mode. All streaming options are located under the card’s Streaming tab.
Encoders - Cube, Prism and Vidiu Products Prism Card/Device Configuration
-
Prism HD+ 1RU/2RU
Updated onArticlesEncoders - Cube, Prism and Vidiu Products Prism Technical Specifications