Teradek User Guide

Prism Mobile

Articles

Prism Flex

Articles

Prism 4K 1RU/2RU

Articles

Prism Mobile

Articles

Connect to a Network

Articles

Prism 1RU/2RU allows you to connect to a network using an Ethernet connection, while Prism Flex can connect to a network using Wi-Fi, Ethernet, or a USB modem. Use the front panel interface or the web user interface (web UI) to connect Prism to a network. 

Power and Connect

Articles

1. Connect 100-240v A/C power to the power input on Prism via the enclosed IEC cable. Connect a second cable if your device includes a supplemental power supply.
2. Connect one or both of Prism’s 10/100/1000 Ethernet ports to a network switch or router using an Ethernet cable.
3. Connect SDI video sources to any input BNCs corresponding to installed encoder cards.
4. Connect SDI outputs via BNC cable to your monitor/switcher/router.
5. Using the menu joystick, navigate to the Network Settings menu on the front panel. Select a Wired interface, then verify that the IP Mode is set to DHCP.
6. Once Prism is connected to a network, the front panel will display the current assigned or configured IP address for both Ethernet ports.

Encoder/Decoder Configuration

Articles

Configure your decoder to receive streams from an encoder. 

Core

Articles

Prism encoders and decoders can be remotely accessed, configured, and controlled using Teradek’s Core Cloud management and routing service. Core is a professional cloud-based solution for managing, archiving, and routing Teradek encoders and decoders.

System Configuration

Articles

Essential system functions, including factory reset, firmware upgrade, and diagnostics reports can be performed from the System menu in the web UI.

Prism Flex

Articles