Use the Bolt App to remotely manage and monitor every parameter of Bolt 6 including pairing, frequency selection, and 3D LUTs.
Connect via Bluetooth
- Download the Bolt App.
- Enable Bluetooth on your iOS or Android device.
- Navigate to the Bluetooth menu on both the transmitter and receiver, then select Enable.
- Open the Bolt App from your iOS or Android device, then tap the Bolt Devices button.
- Select the device(s) you want to pair or monitor.
Transmitter Status Display
- Settings (Descriptions listed on Transmitter Display Operation section) - Tap the settings button on the top right corner of the screen to customize the transmitter’s various settings.
- Spectrum Analyzer - Detects congestion in the area and determines which frequencies are available to use. Each bar represents a frequency, and the height represents the amount of congestion in that frequency; the higher the bar, the more congested that frequency is. Make sure to always select the shortest, least congested bar.
-
Status - Displays the current status of:
● Video input
● Temperature
● Network
● Camera recording
● Connected receivers
● Region
● Current frequency
● Bandwidth
● Quality
● OSD name
Receiver Status Display
- Settings (Descriptions listed on Receiver Display/OSD Operation section) - Tap the settings button on the top-right corner of the display to customize the receiver’s various settings such as the output format, audio, display, and OSD.
- Signal Quality - Determine the quality and reliability of the signal being received.
- SNR (Signal to Noise Ratio) - Compare the signal power level to the noise power level from the attached antennas.
- Range Analyzer - Displays the transmission distance between the transmitter and receiver.
- Spectrum Analyzer - Detects congestion in the area and determines which frequencies are available to use. Each bar represents a frequency, and the height represents the amount of congestion in that frequency; the higher the bar, the more congested that frequency is. Make sure to always select the shortest, least congested bar.
-
Status - Displays the current status of:
● TX Name
● Quality
● Network
● Temperature
● Link
● Camera recording
● Video input
● Bandwidth
● Current frequency
● Video output
● Range
● OSD name