Ranger Manager

Updated on Jul 18, 2023

Use the Ranger App to remotely manage and monitor every parameter of Ranger including pairing, and frequency selection.

Connect via Bluetooth

Download the Ranger App.
Enable Bluetooth on your iOS or Android device.
Navigate to the Bluetooth menu on both the transmitter and receiver, then select Enable.
Open the Ranger App from your iOS or Android device, then tap the Pairing button.
Select the device(s) you want to pair or monitor.

Settings (Descriptions listed in the Configuration section) - Tap the settings button on the top right corner of the screen to customize the transmitter’s various settings.
Spectrum Analyzer - Detects congestion in the area and determines which frequencies are available to use. Each bar represents a frequency, and the height represents the amount of congestion in that frequency; the higher the bar, the more congested that frequency is. Make sure to always select the shortest, least congested bar.
Status - Displays the current status of:
- Video input
- Temperature
- Network
- Camera Recording
- Connected receivers
- Region
- Current frequency
- Bandwidth
- Quality
- OSD name

Settings (Descriptions listed in the Configuration section) - Tap the settings button on the top-right corner of the display to customize the receiver’s various settings such as the output format, audio, display, and OSD.
Signal Quality - Determine the quality and reliability of the signal being received.
SNR (Signal to Noise Ratio) - Compare the signal power level to the noise power level from the attached antennas.
Range Analyzer - Displays the transmission distance between the transmitter and receiver.
Spectrum Analyzer - Detects congestion in the area and determines which frequencies are available to use. Each bar represents a frequency, and the height represents the amount of congestion in that frequency; the higher the bar, the more congested that frequency is. Make sure to always select the shortest, least congested bar.
Status - Displays the current status of:
- TX Name
- Quality
- Network
- Temperature
- Link
- Camera Recording
- Video input
- Bandwidth
- Current frequency
- Video output
- Range
- OSD name