Use the Ranger App to remotely manage and monitor every parameter of Ranger including pairing, and frequency selection.
Connect via Bluetooth
- Download the Ranger App.
- Enable Bluetooth on your iOS or Android device.
- Navigate to the Bluetooth menu on both the transmitter and receiver, then select Enable.
- Open the Ranger App from your iOS or Android device, then tap the Pairing button.
- Select the device(s) you want to pair or monitor.
Transmitter Status Display
- Settings (Descriptions listed in the Configuration section) - Tap the settings button on the top right corner of the screen to customize the transmitter’s various settings.
- Spectrum Analyzer - Detects congestion in the area and determines which frequencies are available to use. Each bar represents a frequency, and the height represents the amount of congestion in that frequency; the higher the bar, the more congested that frequency is. Make sure to always select the shortest, least congested bar.
-
Status - Displays the current status of:
- Video input
- Temperature
- Network
- Camera Recording
- Connected receivers
- Region
- Current frequency
- Bandwidth
- Quality
- OSD name
Receiver Status Display
- Settings (Descriptions listed in the Configuration section) - Tap the settings button on the top-right corner of the display to customize the receiver’s various settings such as the output format, audio, display, and OSD.
- Signal Quality - Determine the quality and reliability of the signal being received.
- SNR (Signal to Noise Ratio) - Compare the signal power level to the noise power level from the attached antennas.
- Range Analyzer - Displays the transmission distance between the transmitter and receiver.
- Spectrum Analyzer - Detects congestion in the area and determines which frequencies are available to use. Each bar represents a frequency, and the height represents the amount of congestion in that frequency; the higher the bar, the more congested that frequency is. Make sure to always select the shortest, least congested bar.
-
Status - Displays the current status of:
- TX Name
- Quality
- Network
- Temperature
- Link
- Camera Recording
- Video input
- Bandwidth
- Current frequency
- Video output
- Range
- OSD name