Recent updates
-
Network Configuration
Updated onArticlesConfigure Serv’s network interface and encryption options by opening the Network menu from the web UI.
Encoders - Cube, Prism and Vidiu Products Serv Network/System Configuration
-
Network Configuration
Updated onArticlesConfigure Prism’s network interface and encryption options by opening the Network menu from the web UI.
Encoders - Cube, Prism and Vidiu Products Prism Network/System Configuration
-
Intro to the Core Interface
Updated onArticlesCore is a live streaming cloud service that offers network bonding, multi-streaming, cloud device management, point to point professional workflows and more. In this tutorial, we will introduce you to the Core user interface.
Cloud Services Core Getting Started Tutorials
-
Core Billing section guide
Updated onArticlesTo edit & see billing details, customer needs to click on his account name in the top-right corner, then View My Account>Billing.
Cloud Services Core Getting Started Tutorials
-
How to Link Helios to connected device on Core
Updated onArticlesThere are several ways to send a feed from the encoder to Helios:
1- Streaming directly from the device;
2- Connecting device to Helios from Core via RTMP/SRT/Mpeg-TS Destination Channel (described in the guide)
3- Linking the Helios to encoder on Core - is described below.
If you do not have the Helios launched yet, check our Server Lauch Tuitorial.- Go to Encoder page and find the Streaming Servers (Helios) on the right side of the page.
Cloud Services Core Getting Started Tutorials
-
How to stream to Helios directly from the device
Updated onArticlesThere are several ways to send a feed from the encoder to Helios:
1- Linking the Helios to encoder on Core;
2- Connecting device to Helios from Core via RTMP/SRT/Mpeg-TS Destination Channel (described in the guide)
3- Streaming directly from the device, which is described below. We will show the example on Teradek Cube 600 series.- Open the Web UI of your device and go to Video Stream Output tab. You will need to create RTMP(s) destination from your device
Cloud Services Core Getting Started Tutorials
-
How to Use Folders on Core
Updated onArticlesRecording can be easily stored and structured on Core in Folders on Recordings tab.
To be able to add a new Folder, go to http://corecloud.tv and once you open it, navigate to Recordings tab.
1. Then click Folders on kebab menu in the upper-right corner which is next to the Upload File button.
Cloud Services Core Getting Started Tutorials
-
Streaming to Twitter from Core
Updated onArticlesIt is easy to stream to your Twitter page from Core directly via integration. When your device is connected, you just need to link the needed Twitter channel to it.
- Create a new channel by choosing Twitter among options on Core. Here you will need to link your Twitter account and authorise the app:
Cloud Services Core Streaming to CDNs from Core
-
Bolt Panel Antenna V.4
Updated onArticlesIf you're using the Bolt Panel Antenna V.4 with your Bolt 4K/Bolt 4K LT 1500 or MAX receiver, you must connect the five RP-SMA connectors from the receiver to the back of the antenna (see below for connector placement), and position the antenna so that the front (with the Teradek logo) has a clear line of sight to the transmitter.
Wireless Video Bolt 4K Antenna Maintenance
-
Advanced Settings
Updated onArticlesLOCK KEYPAD
Enabling the Lock Keypad feature prevents the menu joystick from being used to avoid any accidental or unauthorized configurations. There are two ways to lock the keypad:- Navigate to Advanced Settings via the front panel and select Lock Keypad.
- Press and hold the menu joystick upward for 5 seconds.
To unlock, press and hold the menu joystick upwards for five seconds or until the display reads "KEYPAD UNLOCKED."
POWER-ON FORMAT
Power-On Format sets the video output format after power-up and before RX receives any video. This allows your receiver to maintain the same resolution that was applied before the unit is turned off.HDMI (RX only)
Bolt 4K supports all HDMI output modes. You can select from one of the following options:- Auto
- RGB 8bit
- RGB 10bit
- YCbCr 4:4:4 8bit
- YCbCr 4:4:4 10bit
- YCbCr 4:2:2 10bit
- YCbCr 4:2:0 8bit
- YCbCr 4:2:0 10bit
AUDIO (RX only)
Configure Bolt’s Audio settings. If Beep on REC is activated, you will hear a short tone whenever the camera begins or stops recording. The Mute Settings allow you to completely mute audio or only mute audio while recording.- Beep on REC - Short tone when the camera begins or stops recording
-
Mute Settings- Select an option:
- Off
- Mute while recording
- On
BLUETOOTH
Use the Bluetooth menu to enable or disable Bluetooth communication.- Enable Bluetooth - Allows transmitter and receiver to be paired and communicate with the Bolt App.
- Use Bluetooth PIN - Enables the use of a PIN for authentication when using the Bolt App.
- Change PIN - Press the Menu joystick towards the right to change the Bluetooth PIN
NOTE: Bluetooth is disabled by default. To configure your Bolt 4K devices via the Bolt App, you must first enable Bluetooth.
BACKGROUND COLOR (RX only)
The Background Color feature allows you to select a screen color to be displayed on the monitor when there is no video being received from the transmitter. This is a useful tool that indicates to the crew that a signal has been dropped and the TX and RX need to be synced again.RESET ALL SETTINGS
Reset all configurable options to their factory settings.Wireless Video Bolt 4K Configuration