Teradek User Guide

Ace Micro Quick Start Guide

Updated on

Ace Micro TX is a lightweight, compact, USB-C wireless video transmitter designed for iPhone and compatible DP Alt Mode cameras. It sends uncompressed, zero-delay video up to 500 feet (150m) and connects to compatible cameras through a single USB-C connection for video and power. Ace Micro is cross-compatible with Ace 750 and Bolt 4K, Bolt 6, and Bolt 7 receivers, allowing it to integrate seamlessly into existing Teradek wireless workflows.

Table of Contents

  1. What's Included
  2. Physical Properties
  3. Power And Connect
  4. Pairing
  5. Bolt App
  6. Other Resources

 

What's Included

  • 1x Ace Micro Transmitter
  • 1x USB-C RA to USB-C RA Cable,18in
  • 1x USB-C RA to USB-C RA Cable, 12in
  • 1x USB-C RA to USB-C RA Cable, 9in
  • 1x PSU 30W USB-C Power Adapter
  • 1x Wooden Camera - Bolt-On Accessory Plate Adapter (RA, M4)
  • 1x Light Stand Adapter
  • 1x Hot Shoe Adapter

Physical Properties

Ace Micro TX

1. Power indicator4. USB-C Power input
2. Link/Video indicator5. USB-C/DP Alt (Video) input
3. Pairing button 

Power and Connect

1. Mount the Ace Micro TX to the iPhone cage or camera rig using the included mounting adapter.

2. Connect the iPhone's USB-C port to the Ace Micro TX USB-C input using a cable that supports DP Alt Mode.

  •  iPhone with USB-C hub and external battery: Connect the hub to the Ace Micro TX using a video-enabled USB-C cable.
  • iPhone with a separate USB-C battery: Connect the battery to the Ace Micro TX power port, then connect the TX video port to the iPhone using a video-enabled USB-C cable. Power passes through the TX to the iPhone.
  • For supported cinema cameras, connect Ace Micro TX directly to the camera's USB-C DP Alt Mode output. 

The Ace Micro will automatically power on using the iPhone or camera as a power source. Note: USB-C cables used for charging do not transmit video. Use a USB-C cable that supports DP Alt Mode.

3. Power on the receiver. Connect the receiver's video output to a monitor, switcher, or other video destination. 
Video will appear within a few seconds.                                               

Warning: Do Not Touch the mounting surface's metal plate during or after use.

  • Keep the area clear of flammable materials.
  • Ensure proper ventilation to prevent overheating.
  • Do not tamper with the device's housing.
  • If overheating occurs, disconnect the power and let it cool before handling.
  • Seek professional help if the issue persists.

Ignoring these warnings may lead to injury, fire, or equipment damage.

Pairing/Unpairing

Ace Micro TX devices must be paired with a receiver using the Bolt Manager, the Bolt App, or by pressing the Pairing Button (3). You will also need to use either the Bolt Manager or the Bolt App to pair your transmitter with multiple receivers. NOTE: Before starting either pairing process, ensure that the transmitter and receiver have the same firmware version and Bluetooth enabled.

Pairing via Pairing Button
Pair:

  1. Press and hold down the transmitter's Pairing Button (3) until the Link/Video indicator (2) blinks rapidly.
  2. Activate Pairing on the receiver.
  3. The indicator on both devices stops blinking and remains solid when pairing is complete.

Unpair:
To unpair Ace Micro TX and the receiver, use the Bolt App or Bolt Manager unpairing steps listed below.

Pairing via Bolt App
Pair:

  1. Open the Bolt App from your iOS or Android device, then tap the Pairing button.
  2. Select the transmitter you wish to pair, then tap the Next button.
  3. Select the receiver(s) you wish to pair with the transmitter, then tap the Pair! button. The Bolt App will indicate when the pairing process is complete.

Unpair:

  1. Open the Bolt App from your iOS or Android device, then tap the TX settings button (3 dots) on the top-right corner of the screen.
  2. Enter the Pairing menu, select the receiver(s) you wish to unpair, and then tap the Unpair button.

Wired Pairing Via Bolt Manager
Pair:

  1. Connect both the transmitter and receiver(s) to your computer (Windows/Mac) via USB.
  2. Open Bolt Manager, select the Pairing tab, then tap the Wired Pairing button.
  3. Select the devices you want to pair, then click the Pair Devices button. Bolt Manager will indicate whether or not Pairing is successful.

Unpair:

  1. Connect the transmitter to your computer (Windows/Mac) via USB.
  2. Open Bolt Manager, select the Pairing tab, then tap the Unpair All button.

Pairing Tips
If you’re having trouble getting units to pair, we recommend keeping the transmitter and receiver six feet apart when pairing. Keep all other RF devices nearby turned off or out of range to ensure the transmitter and receiver are only detecting each other. To eliminate any chance of interference, perform the Wired Pairing process via Bolt Manager.

Bolt App

Download and use the Bolt App to remotely manage and monitor every parameter of Ace Micro including pairing, frequency selection, and 3D LUTs.

Transmitter Status Display

  • Settings - Tap the settings button on the top-right corner of the display to customize the receiver’s settings:
    • Wireless Setting (Band) - Select either the 5GHz or 6GHz wireless frequency.
    • Pairing - Select a transmitter within the same network to pair
    • TX OSD Name - Change how your TX name is displayed.
    • System Info - Displays Device Info (name, type, serial number, etc), Firmware Version Info, the Advanced Settings tab, and the Restart System tab:
      • Advanced Settings:
        • Debug Info
        • Firmware Upgrade
        • Command Tool
        • Logs
  • Status - Displays the current status of:
  • Video Input
  • Network Status
  • Connected Receivers
  • Current Frequency
  • Quality
  • Region
  • Bandwidth
  • OSD name

Receiver Status Display

  • Settings - Tap the settings button on the top-right corner of the display to customize the receiver’s settings:
    • Wireless Setting (Band) - Select either the 5GHz or 6GHz wireless frequency.
    • Pairing - Select a transmitter within the same network to pair
    • RX OSD Name - Change how your RX name is displayed. NOTE: You must re-pair the units to view the updated name.
    • System Info - Displays Device Info (name, type, serial number, etc), Firmware Version Info, the Advanced Settings tab, and the Restart System tab
      • Advanced Settings:
        • Debug Info
        • Firmware Upgrade
        • Command Tool
        • Logs
    • Device Registration
  • Signal Quality - Determine the quality and reliability of the signal being received.
  • SNR (Signal to Noise Ratio) - Compare the signal power level to the noise power level from the attached antennas.
  • Range Analyzer - Displays the transmission distance between the transmitter and receiver.
  • Status - Displays the current status of:
  • TX Name
  • Network Status
  • Link
  • Video Input
  • Current Frequency
  • Range
  • Quality
  • Region
  • OSD name

Other Resources

Next Articles Ace Micro TX

Ace Micro

Quick Start Guide 1
Technical Specifications 2
Still Need Help? Contact Us