Recent updates
-
Frequencies by Region
Updated onArticlesNOTE: Pairing the TX and RX is required after a different region is selected.
Wireless Video Ranger HD and 4K Additional Information
-
Bolt Panel Antenna v.4
Updated onArticlesWireless Video Ranger HD and 4K Technical Specifications
-
Ranger HD System
Updated onArticlesWireless Video Ranger HD and 4K Technical Specifications
-
Ranger 4K System
Updated onArticlesWireless Video Ranger HD and 4K Technical Specifications
-
Power Cables
Updated onArticlesRanger devices use a locking 2-pin power connector similar to the 0B 302 series LEMO connector.
Wireless Video Ranger HD and 4K Getting Started
-
Panel Antenna v.4
Updated onArticlesOMNIDIRECTIONAL ANTENNA
The included omni-directional antenna (A) can receive a signal from your transmitter even when it’s placed behind the Panel Antenna, and supports a wider spectrum (4.9-7.3 GHz).Wireless Video Ranger HD and 4K Physical Properties
-
Regulatory Information
Updated onArticlesPRODUCT INFORMATION
This product is designed to be compliant with rules and regulations in the country it is sold to and therefore is marked as required. These markings signify the countries the device is approved in. Operating the product without regulatory approval is illegal. Any changes or modifications to the product not expressly approved by Teradek could void the user's authority to operate the equipment and its regulatory approvals. Please make sure you use the latest revision of this document which is available at teradek.com.SAFETY INSTRUCTIONS
- Keep these instructions in a safe and accessible place for future use.
- When operating this equipment, read and follow all the instructions in this manual.
- Do not open the unit.
- Do not block the air ventilation openings, and provide proper ventilation for the units to allow them to cool down during operation.
- Use only accessories/batteries/chargers specified or recommended by Teradek.
- When devices are switched ON, keep away at least 20 cm (7.9 in) from your body.
- People with pacemakers should ALWAYS keep the device at the listed distance from their pacemaker when turned ON. Should you have any reason to suspect that interference is taking place, you should turn your device OFF.
- Do not expose to moisture, excessive heat, or fire.
- Keep away from water and other liquids.
- Clean with a dry cloth only.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- To reduce the risk of fire or electric shock, refer servicing to qualified service personnel.
Declared maximum operating temperature: +40°C - Please avoid electrostatic discharge from the antenna ports for proper operation
WARNING
Ranger devices contain sensitive electronic components that can be damaged by electrostatic discharge (ESD). When handling, care must be taken so that the device is not damaged. Damage due to inappropriate handling is not covered by the warranty. For complete warranty information, please see the warranty card that arrived with the device, or visit www.teradek.com/pages/warranty-information.USING THE AC POWER ADAPTOR
- All components must be dry before connecting to an external power source
- Use ONLY a UL/IEC 62368 or UL/IEC 60950-1 2nd revision approved AC/DC power adapter class LPS with an electrical output rating range of 6-28 V DC, 3A, with an ambient temperature range of 0°C to 40°C.
- Use of an alternative AC/DC power adapter will invalidate any approvals given to this unit and may be dangerous.
BATTERY
This device is not supplied with batteries. In case a battery is used, please adhere to the following general battery usage guidelines:- Use batteries with the rated voltage and current characteristics as listed in the manual.
- Use IEC 62133-approved lithium batteries such as the Anton Bauer Digital Battery (Dionic XT 150/Dionic XT 90).
- Verify battery temperature is within the range specified.
- Do not use incompatible/incorrect batteries. Use of an incompatible battery may present a risk of fire, explosion, leakage, or other hazards.
- Severe impact from dropping any battery-operated device on a hard surface could cause the battery to overheat.
RF MODULES
These devices contain the following approved radio modules:Wireless Video Ranger HD and 4K Additional Information
-
Device Placement
Updated onArticlesRanger devices are equipped with a dual-mount battery plate that allows you to attach your device to either the back of a camera, monitor, or Bolt Panel Antenna.
Wireless Video Ranger HD and 4K Mounting
-
Antenna Orientation
Updated onArticlesRanger units require the use of external antennas for basic operation. For Ranger, we recommend ONLY using a Horizontal + Vertical (H+V) antenna configuration.
Wireless Video Ranger HD and 4K Mounting
-
Device Operation
Updated onArticles- Keep the transmitter and receiver at close range for 60 seconds after powering on the devices. This allows them to scan for and select the best wireless frequency.
- For best results when using multiple Ranger systems in the same area, place the transmitters and receivers a few feet apart from each other.
- Operation of other wireless equipment may interfere with the Ranger. Try to separate other wireless transmitters and receivers as much as possible.
Wireless Video Ranger HD and 4K Getting Started